Located in Crockett, Texas, our 15,000 square foot facility houses the presses, finishing equipment and storage systems that help us to serve you so well. Our plans to expand during 2006 are just another way ElastoTech SouthWest continues to excel in providing you fast, reliable, high-quality service and products.
At ElastoTech SouthWest, Inc., we deliver the highest quality products because we know you expect nothing less than the best. Many of our machines have been designed, rebuilt or augmented by our equipment manufacturing subsidiary, ElastoTechnologies. Below is a list of some of the equipment we use to produce our outstanding custom molded and standard rubber products.
|
|
| Compression / Transfer Presses |
| Qty.
|
Size
|
Description
|
| 1 |
32x32 |
HYD. Press Manual Hydraulic 13" RAM 20" Daylight 240V w/ 50"x2'x18" Platform w/ 48"x6'x30" Mold Table w/ 2nd Tier Mold Table |
| 1 |
30x30 |
Stewart Bowling, 15" RAM Compression/Transfer, Knockout Holes in Bottom Bolster Frame (only for rebuild) |
| 1 |
24x24 |
Darnell Manual 15" RAM 24" Daylight 240V |
| 1 |
24x24 |
Darnell Automatic 15" RAM 480V, PID Controls, 27" Table |
| 1 |
24x24 |
Hydraulic Press 20" RAM, 16" Daylight Frame (rebuild) |
| 1 |
24x24 |
Darnell Automatic 18" RAM 480V, PID Controls, 27" Hydraulic Mold Table |
| 1 |
24x24 |
C&S Custom Press Automatic 18" RAM 480V, PID Controls, Overhead Gantry, Hydraulic Mold Table |
| 1 |
24x24 |
Stewart Bowling Hi-Compression 18" RAM, 12" Daylight Elec/Manual (Rebuild) |
| 1 |
20x20 |
Custom RWH Hydraulic Press 8" RAM, 24" Daylight 480V, PID Controls |
| 1 |
20x20 |
Dunbar Automatic Control, 16" RAM 26" Daylight, Dual HiSpeed Side Assist Closure Cylinders, PID Controls - Rebuilt |
| 4 |
18x21 |
Custom Press Frame 8" RAM, 16" Daylight 240V, Allen Bradley Controls 3 Platen Steam Converting to Double Platen Electric |
| 1 |
16x16 |
Custom C&S Automatic DBL Platen 12" RAM 15", PID Controls |
| 2 |
16x16 |
Hysco 10" RAM, 20" Daylight 480V, Hydraulic Table - Rebuild-ready Frames |
| 1 |
16x16 |
Custom C&S Automatic DBL Platen 10" RAM, 16" Daylight 480V, PID Controls, Attached Mold Table |
| 1 |
15x15 |
Custom C&S Automatic 15" Daylight, 12" RAM built for DBL Platen, 480V, PID, 27" Mold Table |
| 1 |
13x13 |
Albert Manual 240V DBL Platen, 8" RAM, 14" Daylight |
| 1 |
12x12 |
Lab Press 6" RAM, Hydraulic, 480V, PID Controls |
| 1 |
12x12 |
Lab Press, 6" RAM, Hydraulic, PID Controls |
| 1 |
12x12 |
Hysco Self-contained Hyd. 35 Gallon, 20+" Daylight, 6" RAM, 480V, New PID Controls |
| 1 |
10x12 |
Lab Press, Hydraulic 480V, New PID Controls |
| 2 |
8x8 |
Custom 4 Bank Unit w/ 6" RAM each, Self-contained 40 Gallon Hydraulic Unit 480V Automatic Controls, Complete PID (4 Presses 8x8 in one unit). ET4-35. Mfg: ElastoTechnologies, LLC. For Resale. |
| Qty.
|
Size
|
Description
|
| 1 |
12x16 |
E T 12"x16"x35", 40 Ton, 7.5 Cub. In. Shot Injection Press Self-contained with Allen Bradley Controls. Mfg: ElastoTechnologies, LLC. For Resale. |
| Material Preparation Equipment |
| Qty.
|
Description
|
| 1 |
Extruder, KOBE, 3" Cold Feed 50 hp Variable Control |
| 1 |
Olin Mill 36"x36"x18" with 75 hp Electric 480V 3ph Rating Motor, Water Chill Valve, Chill Tower |
| 1 |
NRM Mill, 6"x6"x12", Westinghouse Heavy Duty 7.5 hp 480V Electric Motor, Chill Valves, SN865A8-2 |
| Custom Vulcanizing Splice Equipment |
| Qty.
|
Description
|
| 4 |
Vulcanizing Press P200 SMACO, 110-220 Volt with Thermostat Control |
| 2 |
Vulcanizing Press P400 SMACO, 110-220 Volt with Thermostat Control |
| Qty.
|
Description
|
| 1 |
Imtech Cryo Deflasher, 1.5 Cu. Ft. (Remanufactured by ElastoTechnologies), Nitrogen Charged High Velocity 115V 15 Amp, 60 Hz, On/Off Controls, Auto/Manual Shutoff Controller, R.P.M. Throw Wheel Variable Speed, Tumble Media Auger, Cycle Control, Timer Temp. (Remanufactured: 3/2003) |
| 1 |
Sand Blaster, Unihone, 6 Cu. Ft. High Velocity Throw Wheel 220V 3ph Controls, Auto, Manual, Variable Speed R.P.M. Controls |
|
|
